Plug one end of the serial cable into the console port (also known as a serial port or DB9 RS232C asynchronous serial port) of the RouterBOARD and the other end in your PC (which hopefully runs Windows or Linux). If your device has a Serial port, you can use a console cable (or Null modem cable) To edit serial port settings, you have to use "/port edit" or "/port set" Serial Cable To check the configuration of the serial > port print detailĠ name=serial0 used-by=Serial Console baud-rate=9600 data-bits=8 parity=noneġ name=serial1 used-by="" baud-rate=9600 data-bits=8 parity=none > To disable all virtual consoles (available through the direct connection with keyboard and monitor) except for the first system console> printįlags: X - disabled, W - wedged, U - used, F - freeĨ F 8 system console> disable system console> print Number of virtual console - + represents '1', + - '2', etc. Which port should the serial terminal listen to Whether serial console is enabled or not. The Cloud Core Router series devices have a serial header on the PCB board, called J402 or 100Ĭhannel ( integer (0.4294967295) Default: 0) Note: RouterOS 6.45.1 and firmware are required! The Serial Console cabling diagram for DB9 connectors is as follows: With the serial-terminal feature of the MikroTik, up to 132 (and, maybe, even more) devices can be monitored and controlled.Ī special null-modem cable should be used for connecting to the serial console from another computer.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |